Projects

HJS Fencing Newark completed a modern driveway gate replacement featuring a durable anthracite grey composite infill design, supported by a strong black steel frame and posts. These low-maintenance composite gates provide a stylish, secure, and weather-resistant entrance solution that can be installed as manual or automated driveway gates.

Old driveway excavated, Clean stone installed and compacted in layers. Flat top edging installed to give the entrance a clean finish Charcoal block paved edging Sharp sand screed bed Heavy duty membrane Gravel grids 20mm decorative black ice installed at a thickness of 40-50mm All waste taken off site Small area of tarmac installed to give it the nice finish along the front edge

Old boundary fencing was rotten and needed replacing. New featheredge fenxcimg 6ft 4 inch high installed. New 4x4 2.7m wooden posts installed 3x2 4.8 timber rails isntalled. 4x1 4.8 timber gravel board installed. New 6ft featheredge boards. All timber is tanalised.

This old driveway needed a revamp. So here at HJS Fencing & Landscaping LTD that is what we gave the customer. Full excavation. All waste taken off site by grab lorries. Heavy duty membrane installed. Aco drains isntalled. Charcoal block paved edging all primed and installed on a concrete bed. Sorento granite grey infill Blue ice gravel around the edges. All work completed by ourselves and In house